Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
Chemglass Life Sciences Distilling Receiver, 5mL, Moisture Test, Barrett, 14/20 Joint Size, 2mm PTFE Stopcock , Approx. 205mm Height x 75mm Width
Distilling Receiver, 5mL, Moisture Test, Barrett, 14/20 Joint Size, 2mm PTFE Stopcock , Approx. 205mm Height x 75mm Width. Similar to CG-1261 but with the uptake tube vacuum jacketed to improve distillation performance. The jacket eliminates the possibility of condensation or recrystallization of distillate in the sidearm. The 5ml has subdivisions of 0.20ml; 10ml has subdivisions of 0.1ml; the 20ml has subdivisions of 0.2 from 0 to 3ml and 0.5 from 3 to 20mL. Available with glass or PTFE stopcocks.
Chemglass Life Sciences Distilling Receiver, 20mL, Moisture Test, Barrett, 24/40 Joint Size, 2mm PTFE Stopcock, Approx. 325mm Height x 95mm Width
Distilling Receiver, 20mL, Moisture Test, Barrett, 24/40 Joint Size, 2mm PTFE Stopcock, Approx. 325mm Height x 95mm Width. Similar to CG-1261 but with the addition of an overflow tube between the uptake tube and the graduated receiver.
Chemglass Life Sciences Adapter Only, Distribution, 14/20 Joint
Adapter replacement part for the CG1276 series of cow type design distillation receivers. 14/20 Joint. Adapter only.
Chemglass Life Sciences Inlet Feed Tube, 19/38 Joint
Inlet feed tube for “A” assemblies with a 19/38 joint, 90º bore stopcock and PTFE extension tube.
Chemglass Life Sciences Replacement Steam Duct for Buchi R-200/R-205 Rotary Evaporators, 29/42 Steam Duct
Replacement vapor (steam) tube adapter for Bchi R-200/205 rotary evaporators. Adapters have a 50mm OD top flange with a tapered interior to fit the Bchi sealing ring. Lower portion of the adapter has the listed standard taper inner joint. Each tube is supplied complete with corresponding size Keck clip.NOTE: ITEMS WILL REPLACE THE BUCHI PART NUMBERS AS LISTED. CHEMGLASS ITEMS ARE TO BE USED WITH THE KECK CLIP, NOT THE BUCHI COMBI-CLIP.
Chemglass Life Sciences Small Condenser Only, For Extraction Apparatus, Soxhlet
Small condenser. Part of the CG1368 series. Condenser has an enlarged uptake tube to improve condensing capacity.
Chemglass Life Sciences Outer Sleeve Only, Condenser, "C" Assembly, Plastic Coated
Outer Sleeve Only, Condenser, "C" Assembly, Plastic Coated. Outer sleeve only replacement part for the CG-1333-10 plastic coated condenser.
Chemglass Life Sciences 100mL Peptide Synthesis Vessel, Solid Phase, Coarse Frit, GL 25 Thread
100mL Peptide Synthesis Vessel, Solid Phase, Coarse Frit, GL 25 Thread. Solid phase peptide synthesis vessel having a medium or coarse porosity fritted glass resin support. Top of the vessel has a GL thread and is supplied complete with a PTFE lined PBT screw cap. Lower PTFE stopcock has a 2mm bore with the arm being 8mm O.D. Vessels are available in sizes other than those listed. Please call for details.
Chemglass Life Sciences 15mL Heavy Wall Pressure Vessel, Cylindrical, #15 Internal Thread, Vessel Only, 25.4mm O.D. x 102mm Length, Bushing Size/15
15mL Heavy Wall Pressure Vessel, Cylindrical, #15 Internal Thread, Vessel Only, 25.4mm O.D. x 102mm Length, Bushing Size/15. Heavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The design allows hand tightening/loosening for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Supplied complete with vessel, PTFE bushing & Viton o-ring. Optional Perfluoro o-ring has the chemical resistance & service temperature range similar to Kalrez 4079. See CG-362, CG-364, and CG-366 for optional PTFE Bushings.IMPORTANT NOTICE: ALL CHEMGLASS PRESSURE VESSELS ARE TESTED AT 150 PSI, OR APPROX TWO AND ONE-HALF TIMES THEIR RECOMMENDED WORKING PRESSURE. HOWEVER, CHEMGLASS DOES NOT GUARANTEE THE VESSEL FROM BREAKING UNDER PRESSURE, DUE TO THE NATURE OF MATERIAL AND CONDITIONS BEYOND OUR CONTROL. CHEMGLASS RECOMMENDS THE USE OF SAFETY SHIELDS AND/OR OTHER SAFETY EQUIPMENT.
Chemglass Life Sciences 75mL Heavy Wall Pressure Vessel, Round Bottom, #25 Internal Thread, Complete, 52mm O.D. x 102mm Length, Bushing Size/25
75mL Heavy Wall Pressure Vessel, Round Bottom, #25 Internal Thread, Complete, 52mm O.D. x 102mm Length, Bushing Size/25. Heavy wall pressure vessels have an internal thread for use with PTFE bushings as pressure seals. The design allows hand tightening/loosening for easy access into the vessel. O-ring is positioned on the bushing above the thread for improved sealing. Supplied complete with vessel, PTFE bushing & Viton o-ring. Optional Perfluoro o-ring has the chemical resistance & service temperature range similar to Kalrez 4079. See CG-362, CG-364, and CG-366 for optional PTFE Bushings.IMPORTANT NOTICE: ALL CHEMGLASS PRESSURE VESSELS ARE TESTED AT 150 PSI, OR APPROX TWO AND ONE-HALF TIMES THEIR RECOMMENDED WORKING PRESSURE. HOWEVER, CHEMGLASS DOES NOT GUARANTEE THE VESSEL FROM BREAKING UNDER PRESSURE, DUE TO THE NATURE OF MATERIAL AND CONDITIONS BEYOND OUR CONTROL. CHEMGLASS RECOMMENDS THE USE OF SAFETY SHIELDS AND/OR OTHER SAFETY EQUIPMENT.
Chemglass Life Sciences Adapter, Distillation, 29/42 Inner Joints, Bent 75°
Adapter, Distillation, 29/42 Inner Joints, Bent 75°, with standard taper inner joints at a 75º angle to one another.
Chemglass Life Sciences Adapter, Distillation, 75°, 29/42 Inner Joints, 10/30 Thermometer Joint For 75mm Immersion
Adapter, Distillation, 75°, 29/42 Inner Joints, 10/30 Thermometer Joint For 75mm Immersion. Adapter has a standard taper outer joint at the top of the main tube for use with jointed thermometers. The 10/18 size is used with 10/18, 25mm immersion thermometers while the 10/30 is for use with 10/30, 75mm immersion thermometers. With inner joints on the bottom and sidearm at a 75º angle to one another.
Chemglass Life Sciences Adapter, Distillation, 75°, 19/22 Inner Joints, 10/18 Thermometer Joint For 25mm Immersion
Adapter, Distillation, 75°, 19/22 Inner Joints, 10/18 Thermometer Joint For 25mm Immersion. Adapter has a standard taper outer joint at the top of the main tube for use with jointed thermometers. The 10/18 size is used with 10/18, 25mm immersion thermometers while the 10/30 is for use with 10/30, 75mm immersion thermometers. With inner joints on the bottom and sidearm at a 75º angle to one another.
Chemglass Life Sciences Adapter, Distillation, 29/42 Joint Size, Side Inner Joint At 75°
Adapter, Distillation, 29/42 Joint Size, Side Inner Joint At 75°, with standard taper outer joint at the top, and inner joints on the bottom and sidearm, all being the same size. Inner joints are at a 75º angle to one another.